Sailboat Maintenance Checklist – 10 Critical Daily/Weekly Checks

When your boat is stationary for any length of time – either at a marina or at anchor, if you’re going to be living on the boat and using the various systems there are several key things to keep an eye on. Below you’ll find a 10-step Sailboat Maintenance Checklist for routine mission critical daily and/or weekly checks and a video where Simon and I demonstrate the steps.

Sailboat Maintenance Checklist

Note: the below checklist can be found in my guide, ‘Checklists for Sailors: Passage Planning, Sailboat Maintenance, Cleaning, Medical and More’ in addition to 19 other checklists. You can get more information on my guide by clicking on the image below. The guide comes in either digital or hardcopy format and the hardcopy can be shipped within the US. If you’d like to purchase the hardcopy guide outside of the US, you’ll find it on your local Amazon website.

Sailboat Maintenance Checklist

Sailboat Maintenance Checklist – 10 critical tasks

#1 – Survey the Bilge

Every morning, or at least every few days, survey the bilge for water, oil or fuel leaks. It’s good to get in the habit of lifting a central floorboard often just to make sure that the bilge is dry. I especially lift the floorboards after a heavy rainstorm and when turning on the engine or generator if it hasn’t run for a while. Leaks can come from a variety of areas – we’ve had a fresh water shower hose form a slow trickle through to a busted hot water hose causing the floodgates to open. We’ve also had leaks coming from holes in the deck, loose hatch seals and improperly sealed windows.

TIP: The first thing to do when you find a leak is to taste the water. Is it fresh or is it salt?! That is the first clue to start problem solving…Furthermore, freshwater leaks are manageable but saltwater could be a big issue!

#2 – Test the bilge pump and ensure it’s on automatic

Test that your bilge pump is working to ensure it’s working and ensure it’s on automatic. Bilge pumps are mission critical. Some boats have engines, batteries and other valuable systems below the waterline. A leak could become disastrous very quickly if the bilge pump isn’t triggered.

#3 Check the raw water sea strainers

Check your seas strainers! If you’re running your generator, air conditioning/heat, refrigeration or anything that requires a raw or salt water cooling system to run, you’ll want to keep an eye on your strainers. Interestingly, we never had to clean our strainers in the Caribbean or Mediterranean but along the east coast of America we have to clean them weekly.

#4 Ensure all raw water flows are flowing

Check the water flow on all of your raw water cooling systems. Make sure that you can see the aircon/heating/refrigeration/genset cooling water easily flow out of the boat. As with most of our Sailboat maintenance checklist tasks we’ve learned by experience. One day I noticed our freezer water outflow barely trickling out. I immediately knew there was and issue and was able to fix the problem before it became a disaster ?



#5 Check the fresh water level

Our fresh water system is pressurized by an accumulator tank. If and when we get too low it throws our whole system out of whack and it can take hours to get it working correctly again. For us, it’s imperative that we never let our water tanks empty. Another reason to keep an eye on water levels comes down to a decision to ration. If you want to stay at anchor for a few more days yet you’re running out of water, it’s important to reduce water consumption. Or…if you have a watermaker, it might be time to make some water.

#6: Check your battery charge levels every day

Depending on your batteries and the systems you have to keep them charged over time you’ll get to grips with how long you can last without having to take action. Some boats have solar and wind power that constantly tops up the batteries. Other boats, like ours, depend on having our generator running periodically to charge them up. We keep a very close eye on our battery charge level and when the charge level gets low we charge them.

#7: Keep and eye on the Fridge/Freezer Temperature

The effectiveness of a fridge/freezer can often depend on the temperature of the sea that you’re in. In the Med you might need one setting and then once you get to the Caribbean you’ll have to change it. Furthermore, many boat refrigeration systems get a build up over time making the unit less and less effective causing the need to slowly reduce the temperature gauge. At least once a week I’m changing our temperature gauge with the goal of keeping the fridge temperature blow 5 degrees and the freezer below freezing.

#8: Generator checks

If you’re running the generator often you’ll want to check it’s vitals at least once a week. Check the oil, water level, belt and have an overall look around for leaks, loose connections and any dirt. Keeping the genset clean will allow you to see leaks easily.

#9: Run your watermaker weekly even if you don’t need water

Depending on what system you have most watermakers need to run at least every 7 to 12 days to keep the system in good shape. While at anchor it’s easy to keep the watermaker active but when entering a marina for a long-ish stay it can be forgotten. If at a marina for longer than the 7 – 12 days a temporary pickling can be put in place to preserve the effectiveness of the watermaker.

#10: Dive on your anchor if possible and/or considering re-anchoring and if at a marina, check your warps

If you’re in clear waters and it’s easy to dive on your anchor, go down and check it out. Make sure that it’s firmly set in. Additionally, look at the chain along the seafloor. Over time chain can rub on rocks and get damaged or worse, it can hit reef and destroy it. Especially in strong tidal areas anchors can get dislodged, chains can get tangled in rocks/reef and the ultimate effectiveness of your ground tackle can be compromised. Just because your anchor may have been set for days doesn’t mean that it will always stay set.

And when you’re at a marina, check your warps every time the tide changes. Also check when the wind starts to blow or before a storm is coming. Conditions change often and although the boat might seem to be docked fine, a change of tide might cause it to become dangerously close to the jetty. Look at the fenders as well. Fenders can pop up unexpectedly.

Sailboat Maintenance Checklist – 10 critical tasks VIDEO

There you have it – the 10 critical daily and/or weekly boat maintenance checks when on anchor or at a marina.

Sailing T-shirtsIf you have daily or weekly sailboat maintenance checks that you’d like to add, please leave them in the comments below. Check out more of our sailing and sailboat related checklists here: Sailing Checklists

 

As always, a big ‘thank you’ to all our Patreon patrons, Sailing Britican Guide and T-shirt buyers. Note that all the t-shirts we had on in the video above can be purchased. You’ll find them in our Sailing Britican Etsy shop. There’s T-shirts for everyone – women, men and children. They make very unique gifts for loved ones! Click on the image here to see our full range of designs and colors.

Proceeds from our Patrons, Guide & T-shirt buyers make it possible for us to put out these free education articles and videos.

If you’d like to be notified weekly of new educational sailing articles and video’s make sure to sign up to my newsletter here. By signing up to the newsletter you’ll also gain access to my free guide, ‘How to Buy A Sailboat Without Getting Screwed.’

 

The post Sailboat Maintenance Checklist – 10 Critical Daily/Weekly Checks appeared first on Sailing Britican.